Skip to content
[Custom] .925 Sterling Silver Triple Teeth Grillz Cap
Check out our Sterling Silver Triple Teeth Grillz Cap - it's all about that double dose of bling! These Grillz, they got you covered, literally, over tnree teeth, adding that extra flair to your smile. Crafted with the real deal, Sterling Silver, they bring the Bronx luxury right to your teeth.
- Comes in real solid Sterling Silver
- Handcrafted and custom-made to fit your teeth perfectly.
- Free mold kit.
If you have any missing teeth, have a customization request, or have questions contact us at support@rhinogrillz.com, use our online chat, send a message on Instagram or Facebook, or contact us form.
Because of the customized nature of the product, the grillz may vary slightly from product pictures.
We can accommodate one missing tooth for this grillz setup. The missing tooth (gap) must be located in the middle of the two normal teeth, this is to ensure sufficient support. So for setup 1-3, the missing tooth will be in position 2.
ORDERING
1. Select teeth position and options, than add to cart. Once you have completed the order, we will send you the mold impression kit. If you want to save time, you can also make your own mold impression, and send it to us, please email support@rhinogrillz.com for further details.
2. When you receive the mold impression kit, you can proceed to make an impression. For instructions on making an impression, please refer to this guide Making a Mold Impression. After you have made the impression, please send the mold impression to.
Rhinogrillz
145 Tyee Dr, # 34784
Point Roberts, WA 98281 USA
3. You will receive your custom grillz 3-4 weeks after we receive your teeth mold impression if you are in Canada or the United States. 4-6 weeks if you are in Europe. We will update you when we have received your mold impression and when your grillz are finished and ready to ship. Time required to manuacture your grillz will vary depending on how busy we are, we will let you know if there are any delays. There will be a shipping charge of US$15 for European Custom Grillz Orders below US$150.00.
Disclaimer: Our grillz are for cosmetic and entertainment purposes only and should not be used for the replacement of natural teeth or broken fillings. You must make your own impression with the do-it-yourself mold kit or have your impression made by a licensed dentist. We will not be held liable for any direct, indirect, incidental, special, or consequential losses or damages arising from the use of our products.
PRICING CHANGES
Due to the changing market prices of precious metals such as gold and silver, our custom grillz prices periodically get updated and are subject to change. For this reason, please mail your mold impressions within a reasonable time frame (30-60 days max) after your original purchase date, as prices can increase and you will be responsible for any price differences if your mold is received outside this time frame.
RETURNS
What's your return policy on custom grillz?
Because of the type of product, custom made mouth jewelry, our grillz don't come with any warranty, and cannot be exchanged or returned.
Can I cancel an existing order?
Our Custom grillz orders can be cancelled only before production or within 30 day after the purchase date, which ever comes first. A cancellation fee of $30 per grill will be deducted from the total refund for order that are cancelled.
Once we receive your dental mold impressions, the order is in production, the sale is final and non-refundable. If there is a problem with your mold impression you sent we will inform you and send another kit free of charge (this applies for the first replacement kit, for subsequent kits its US$30 / kit).
Your journey to great looking Custom Grillz begins with the perfect impression. These step-by-step instructions will help you create the mold impression in the comfort of your own home so we can make a better fitting Grillz.
What You Get With Your Molding Kit
If you want to save time, you can purchase your own molding kit and send the mold impression to us. If you decide to wait for the free molding kit to arrive, here is what you will get.
- Ordered Top/Bottom Grillz: 2 Top / 2 Bottom Tray and Impression Putty Set (Base and Catalyst)
- Ordered Full Set Grillz: 2 Top and Bottom Tray and 2 Impression Putty Sets (Base and Catalyst).
TOP TRAY BOTTOM TRAY
IMPRESSION PUTTY
Step 1: Read Instructions
Read the instructions in its entirety before starting, to ensure your top and bottom impressions are deep and accurate for us to make your Grillz. After you have read the instructions, carefully follow each step
Step 2: Brush Your Teeth and Wash Your Hands
- Brushing for three minutes.
- Flossing all your teeth
- Rinse. Use mouthwash.
- Wash your hands.
Step 3: Test The Tray
- Cover your teeth. Pull your lips back, you should not see your teeth over the top of the plastic lip.
- Pulling your cheek to the side with a "hooked finger" will make it easier to fit larger trays.
- Feel roomy. The tray shouldn't pinch your teeth when it's empty, so there should be room for the putty. If the tray is too narrow, your teeth will scrape the side walls of the tray..
- Fit both front and back. Your back teeth shouldn't hang out over the back of the tray.
If your trays feel too small or too large, contact us before you get started with your impressions, we will send a new tray..
Step 4: Mix Your Putty
Only make one impression at a time, if you need to make a top and bottom impression, do them separately.
- Empty both the white and colored putty into your hands.
- Set a timer for 30 Seconds and press start.
- Mash the two colors together until the putty is one solid color. Stop mashing when the timer sounds at 30 seconds..
- Roll into a ball
Step 5: Shape Putty Into Log Place In Tray
After rolling it into a ball, make it into a log. Bend the log-shaped putty like in the photo below.
Place putty into the tray as shown below.
Step 6: Take Your Impression
Top Impression
- Align. Find the center of the tray, and line up your center teeth with that space.
- Push up with your thumbs. Push your tray into the teeth until the putty covers your gumline. Stop before the bottom of your teeth hit the tray. (See Photo)
- DO NOT BITE DOWN !!! Use your thumbs and press upward.
- Center. Ensure both sides of your teeth are pushed evenly into the putty.
- Pull your upper lip up and over the edge of the tray.
Set timer for 3.5 minutes or 210 seconds.
As you wait for the putty to harden, you may rest your jaw and gently close your mouth, but don't clench your teeth or apply pressure. If you clench your teeth, the putty will shift and become distorted.
Remove the trays early, and you won't have a firm impression. Leave the putty on too long, and it's hard to remove.
Bottom Impression
- Align. Find the center of the tray, and line up your center teeth with that space.
- Press down with your thumbs. Press the tray into the teeth until the putty covers your gumline. Stop before the bottom of your teeth hit the tray. (See Photo)
- DO NOT BITE DOWN with you upper teeth!!! Use your thumbs and press the tray downward.
- Center. Ensure both sides of your teeth are pushed evenly into the putty
- Pull your bottom lip down and then up over the edge of the tray.
Set a timer for 3.5 minutes or 210 seconds.
As you wait for the putty to harden, you may rest your jaw and gently close your mouth, but don't clench your teeth or apply pressure. If you clench your teeth, the putty will shift and become distorted.
Remove the trays early, and you won't have a firm impression. Leave the putty on too long, and it's hard to remove.
Step 7: Remove Tray
Press against the putty to see if it has fully hardened. If the putty is still mushy, wait another 30-40 seconds. If you remove the impression too early, the putty will become warped if you try to remove it.
Grip the tray handle, and slowly pull downward on the top tray or lift upward on the bottom tray.
Your impression should capture all of your your teeth as well as the gum-line.
Step 8: Inspect Your Impression
- REMINDER: DO NOT REMOVE THE MOLD IMPRRESSION FROM THE TRAY
- Rinse your impression with water, and dry..
- Send a photo of your impression to support@rhinogrillz.com, and we tell you if its OK or not.
Step 9: Ship Your Impression
- Seal your impression in a ziplock bag. The mold impression must be sent attached to the tray.
- Printout the Order Slip provided, and fill it out. If you need help filling it out. please contact us at support@rhinogrillz.com.
- Place the impression(s) and completed Order Slip into a padded envelope and send to the following address:
- Put the PO 34784 in the Apt Number Section of The Address Box
- For those who decide to send their own impression mold, include your contact information and invoice number with your impression. Remember the mold impression must be attached to the tray..
- For Canadian customers you can save money by using the service chitchat.ca to send the mold impression to us.